You are not logged in.

#1 2018-11-07 03:05:23

ops
Member
Registered: 2018-01-10
Posts: 6

Printing Time & Composer Advanced Settings

Hello

What light intensity is taken into account for a calculation of printing time

we have the value from
1-printer.ini
2-material file : 2 values
3-advanced composer materials

1-
[LED Calibration]
Platform Intensity="6.83"
Platform Intensity Adjusted="6.83"
Internal Intensity Active="146.6552795031056"
Internal Intensity Inactive="100.62111801242236"
Dark Intensity="0"
Calibration Build X="120.93"
Calibration Build Y="68.023"
Dark Intensity Now="0"
Internal Intensity Active Now="146.90683229813664"
Internal Intensity Inactive Now="101.62732919254657"
Platform Intensity Now="6.898300000000001"
Min Dynamic Range="100"
Power Level="100"
Max Power Level="853"

AND

[Intensity Data]
Enabled="TRUE"
Columns="3"
Rows="3"
Intensities="6.78,6.98,7.61,6.9,7.02,7.7,7.1,7.23,7.73"

2-[:/MAX-Platform/Curing]
Light Intensity=2.5

; 2017-10-10, Pro2 (385 nm), 4.8 mW/cm², 23.0 °C
Z=[4.8, 0.02]
Z=[7.2, 0.12]
Z=[9.6, 0.15]
Z=[12.0, 0.20]
Z=[14.4, 0.23]
Z=[16.8, 0.26]
Z=[19.2, 0.28]
Z=[21.6, 0.31]
Z=[24.0, 0.32]
Z=[26.4, 0.35]
Z=[28.8, 0.36]
Z=[31.2, 0.38]
Z=[33.6, 0.40]

here 2 values 2.5 and 4.8 .... which is taken

3-advanced composer : 2.5

which is the value taken to calculate the printing times?

Regards
Ops

Offline

Board footer

Powered by FluxBB