The world’s most advanced curing device
Intelligent Curing
Internal light sensors measure the dose of light reaching objects in the chamber, for quantifiable curing no matter how many objects are present.
The Two Potato Problem – solved.
Vacuum curing
A high-performance internal vacuum pump eliminates sticky surfaces caused by oxygen inhibition without the cost and hassle of expensive inert gas.
Infrared heating
Attain the full potential of materials by curing at elevated temperatures.
Heat to 80°C with internal infrared heating for accelerated reaction kinetics and optimal glass-transition properties.
Inert gas connectivity
The Cure allows external gasses to be connected if required.
Vacuum evacuation before filling ensures minimal gas wastage and residual gas concentrations of less than 1ppm.
Validated materials
Pre-programmed curing profiles for hassle-free integration into your workflow. Alternatively create your own via the Cure’s intelligent user-interface.
Dazzlingly Powerful
Immersive light curing with high-powered ultraviolet LEDs for performance and longevity.
“This isn’t just a better way to cure – it’s a more responsible way to work.”
Terry Whitty, Owner, Fabdent
Scientific by design
Touchless entry
Keep your hands free with the touchless lid-opening mechanism.
A simple wave gesture is all it takes.
Smart interface
Take control of all curing parameters including dose, time, temperature, vacuum pressure, and external gas input.
Acceleration port
An external vacuum pump can be connected to the Cure to reduce vacuum pull-down times to seconds, optimising speed and throughput in demanding, time-sensitive environments.
Infinitely flexible
Cure any resin from any manufacturer with the onboard material profile library or with fully customisable settings.
Easily create and save curing profiles through the user interface.
Plug & play
Automatic curing for a wide range of materials with profiles pre-loaded onto the Cure.
You can also create and save your own curing profiles with the simple on-screen editor.
Infinitely flexible
Cure any resin from any manufacturer with the onboard material profile library or with fully customisable settings.
Easily create and save curing profiles through the user interface.
Acceleration port
An external vacuum pump can be connected to the Cure to reduce vacuum pull-down times to seconds, optimising speed and throughput in demanding, time-sensitive environments.
Developed for 3D printing
Designed for you
Multi-Award winning design
Technical specifications
| Product specification | Cure 1.5 | Cure 2.5 |
|---|---|---|
| Chamber Volume | 1.5L | 2.5L |
| Chamber size xyz | 143 x 199 x 60mm | 143 x 199 x 115mm |
| Technology | Vacuum chamber, Dose curing, IR heating, Nitrogen connectivity |
| Smart user features | Touchless lid opening, Automatic and customizable curing protocols, Smart interface |
| Network Compatibility | Wifi, Wireless Direct, Ethernet |
| Power Requirements | 100-240V AC 50-60Hz 2.8A Max |
| System Sizing | 360 x 330 x 240 | Weight 15Kg 14.17 x 13 x 9.44 inches | Weight 33 Lbs |
| Packed Sizing | 490 x 460 x 460 | Weight 19.5Kg 19.3 x 18.1 x 18.1 inches | Weight 43 Lbs |
| Warranty | 12 months manufacturer's warranty |
| Technical Support | Unlimited lifetime technical support included |
Cure smarter
